1 added
2 removed
Original
2026-01-01
Modified
2026-02-28
1
-
<p>125 Learners</p>
1
+
<p>153 Learners</p>
2
<p>Last updated on<strong>September 30, 2025</strong></p>
2
<p>Last updated on<strong>September 30, 2025</strong></p>
3
<p>A cone is a 3-dimensional shape that has a circular base. The surface area of the cone is the total area covered by its outer surface. The surface area of the cone includes both its curved surface and its base, while the curved surface area only includes the slanted part of the cone. In this article, we will learn about the surface area of a cone.</p>
3
<p>A cone is a 3-dimensional shape that has a circular base. The surface area of the cone is the total area covered by its outer surface. The surface area of the cone includes both its curved surface and its base, while the curved surface area only includes the slanted part of the cone. In this article, we will learn about the surface area of a cone.</p>
4
<h2>What is the Surface Area of a Cone?</h2>
4
<h2>What is the Surface Area of a Cone?</h2>
5
<p>The surface area<a>of</a>a cone is the total area occupied by the boundary or surface of a cone. It is measured in<a>square</a>units.</p>
5
<p>The surface area<a>of</a>a cone is the total area occupied by the boundary or surface of a cone. It is measured in<a>square</a>units.</p>
6
<p>A cone is a 3D shape made by turning a triangle around one of its sides. It has a round<a>base</a>at the bottom and a sharp point at the top called the vertex.</p>
6
<p>A cone is a 3D shape made by turning a triangle around one of its sides. It has a round<a>base</a>at the bottom and a sharp point at the top called the vertex.</p>
7
<p>A cone has a curved side and a flat base, so it has two surface areas: the curved surface area and the total surface area. </p>
7
<p>A cone has a curved side and a flat base, so it has two surface areas: the curved surface area and the total surface area. </p>
8
<p>Cones are classified into two types: right circular cones and oblique cones.</p>
8
<p>Cones are classified into two types: right circular cones and oblique cones.</p>
9
<p>When the tip of the cone is exactly above the center of the base, it forms a neat, even shape called a right circular cone. If the vertex is not above the middle of the base and the cone leans to one side, then it is an oblique cone.</p>
9
<p>When the tip of the cone is exactly above the center of the base, it forms a neat, even shape called a right circular cone. If the vertex is not above the middle of the base and the cone leans to one side, then it is an oblique cone.</p>
10
<h2>Surface Area of a Cone Formula</h2>
10
<h2>Surface Area of a Cone Formula</h2>
11
<p>A cone has a curved surface, and it has two types of surface areas: the curved surface area and the total surface area. Look at the cone below to see its surface area, height(h), slant height(l), and radius(r).</p>
11
<p>A cone has a curved surface, and it has two types of surface areas: the curved surface area and the total surface area. Look at the cone below to see its surface area, height(h), slant height(l), and radius(r).</p>
12
<p>A cone has two types of surface areas:</p>
12
<p>A cone has two types of surface areas:</p>
13
<ul><li>Curved Surface Area of a Cone </li>
13
<ul><li>Curved Surface Area of a Cone </li>
14
<li>Total Surface Area of a Cone </li>
14
<li>Total Surface Area of a Cone </li>
15
</ul><h3>Curved Surface Area of a Cone</h3>
15
</ul><h3>Curved Surface Area of a Cone</h3>
16
<p>The area of the curved part of the cone, excluding its base, is known as the curved surface area of a cone. The curved surface area of the cone is called the lateral surface area of a cone. The<a>formula</a>for the CSA (Curved Surface Area) of the cone is given as: Curved Surface Area = 𝜋rl square units Here, r is the radius of the base of a cone. l is the slanting height of the cone.</p>
16
<p>The area of the curved part of the cone, excluding its base, is known as the curved surface area of a cone. The curved surface area of the cone is called the lateral surface area of a cone. The<a>formula</a>for the CSA (Curved Surface Area) of the cone is given as: Curved Surface Area = 𝜋rl square units Here, r is the radius of the base of a cone. l is the slanting height of the cone.</p>
17
<h3>Total Surface Area of a Cone</h3>
17
<h3>Total Surface Area of a Cone</h3>
18
<p>The total area occupied by the cone, including the area of the curved surface and the area of the circular base, is known as the total surface area of the cone. The total surface area of a cone is calculated by using the formula:</p>
18
<p>The total area occupied by the cone, including the area of the curved surface and the area of the circular base, is known as the total surface area of the cone. The total surface area of a cone is calculated by using the formula:</p>
19
<p>Total surface area = πr(r + l) square units Where r is the radius of the base of the cone. L is the slant height of the cone.</p>
19
<p>Total surface area = πr(r + l) square units Where r is the radius of the base of the cone. L is the slant height of the cone.</p>
20
<h2>Derivation of the Total Surface Area of a Cone</h2>
20
<h2>Derivation of the Total Surface Area of a Cone</h2>
21
<p>To find the total surface area of a cone, imagine slicing it from the tip to the edge of the base and unfolding it. When we spread it out flat, the curved surface becomes a part of a circle, called a sector. Let us take a cone with height(h), radius of the base(r), and a slant height(l).</p>
21
<p>To find the total surface area of a cone, imagine slicing it from the tip to the edge of the base and unfolding it. When we spread it out flat, the curved surface becomes a part of a circle, called a sector. Let us take a cone with height(h), radius of the base(r), and a slant height(l).</p>
22
<p>Total surface area of a cone = base area of a cone + curved surface area of a cone</p>
22
<p>Total surface area of a cone = base area of a cone + curved surface area of a cone</p>
23
<p>Here, the base area of a cone = 𝜋r2 Curved surface area of a cone = 𝜋rl</p>
23
<p>Here, the base area of a cone = 𝜋r2 Curved surface area of a cone = 𝜋rl</p>
24
<p>Substituting the formulas into the total surface area, </p>
24
<p>Substituting the formulas into the total surface area, </p>
25
<p>Total surface area of a cone, T = 𝜋r2 + 𝜋rl Take the common<a>terms</a>out: T = 𝜋r(r + l)</p>
25
<p>Total surface area of a cone, T = 𝜋r2 + 𝜋rl Take the common<a>terms</a>out: T = 𝜋r(r + l)</p>
26
<p>Therefore, the total surface area of cone T = 𝜋r(r + l)</p>
26
<p>Therefore, the total surface area of cone T = 𝜋r(r + l)</p>
27
<h3>Explore Our Programs</h3>
27
<h3>Explore Our Programs</h3>
28
-
<p>No Courses Available</p>
29
<h2>Volume of a Cone</h2>
28
<h2>Volume of a Cone</h2>
30
<p>The volume of a cone shows how much space is inside it. It tells us how much space is inside the cone or how much it can hold. It is one-third of the volume of a cylinder with the same height and base. The volume of a cone can be found by using the formula:</p>
29
<p>The volume of a cone shows how much space is inside it. It tells us how much space is inside the cone or how much it can hold. It is one-third of the volume of a cylinder with the same height and base. The volume of a cone can be found by using the formula:</p>
31
<p>Volume = ⅓ (𝜋r2h) (cubic unit)</p>
30
<p>Volume = ⅓ (𝜋r2h) (cubic unit)</p>
32
<h2>Real-Life Applications of the Surface Area of a Cone</h2>
31
<h2>Real-Life Applications of the Surface Area of a Cone</h2>
33
<p>The surface area of a cone helps us understand how much space is covered by the cone. It is used in may fields such as construction, manufacturing, and packaging. Below are some real-life examples where it is applied.</p>
32
<p>The surface area of a cone helps us understand how much space is covered by the cone. It is used in may fields such as construction, manufacturing, and packaging. Below are some real-life examples where it is applied.</p>
34
<ul><li><strong>Food Industry:</strong>In making ice cream cones and packaging, surface area is used to figure out how much chocolate or coating is needed to cover the cone and how much material is needed to wrap it. </li>
33
<ul><li><strong>Food Industry:</strong>In making ice cream cones and packaging, surface area is used to figure out how much chocolate or coating is needed to cover the cone and how much material is needed to wrap it. </li>
35
</ul><ul><li><strong>Road Safety:</strong>In road safety, traffic cones are used to control traffic. Surface area helps in calculating how much material or paint is needed to make or cover each cone, especially if reflective strips are added.</li>
34
</ul><ul><li><strong>Road Safety:</strong>In road safety, traffic cones are used to control traffic. Surface area helps in calculating how much material or paint is needed to make or cover each cone, especially if reflective strips are added.</li>
36
</ul><ul><li><strong>Architecture:</strong>In designing cone-shaped roofs and tents, surface area helps builders know how much fabric, tiles, or paint is needed to cover the outer surface. </li>
35
</ul><ul><li><strong>Architecture:</strong>In designing cone-shaped roofs and tents, surface area helps builders know how much fabric, tiles, or paint is needed to cover the outer surface. </li>
37
</ul><p>What Is Measurement? 📏 | Easy Tricks, Units & 🎯 Fun Learning for Kids | ✨BrightCHAMPS Math</p>
36
</ul><p>What Is Measurement? 📏 | Easy Tricks, Units & 🎯 Fun Learning for Kids | ✨BrightCHAMPS Math</p>
38
<p>▶</p>
37
<p>▶</p>
39
<h2>Common Mistakes and How to Avoid Them in the Surface Area of a Cone</h2>
38
<h2>Common Mistakes and How to Avoid Them in the Surface Area of a Cone</h2>
40
<p>Students often make mistakes while calculating the surface area of a cone, which leads to wrong answers. Below are some common mistakes and the ways to avoid them. </p>
39
<p>Students often make mistakes while calculating the surface area of a cone, which leads to wrong answers. Below are some common mistakes and the ways to avoid them. </p>
41
<h3>Problem 1</h3>
40
<h3>Problem 1</h3>
42
<p>Find the curved surface area of a cone with a radius of 7cm and a slant height of 10 cm.</p>
41
<p>Find the curved surface area of a cone with a radius of 7cm and a slant height of 10 cm.</p>
43
<p>Okay, lets begin</p>
42
<p>Okay, lets begin</p>
44
<p>CSA = 220 cm2</p>
43
<p>CSA = 220 cm2</p>
45
<h3>Explanation</h3>
44
<h3>Explanation</h3>
46
<p>Given r = 7 cm, l = 10 cm.</p>
45
<p>Given r = 7 cm, l = 10 cm.</p>
47
<p>Use the formula: CSA = πrl</p>
46
<p>Use the formula: CSA = πrl</p>
48
<p>= (22/7) × 7 × 10</p>
47
<p>= (22/7) × 7 × 10</p>
49
<p>= 22 × 10</p>
48
<p>= 22 × 10</p>
50
<p>= 220 cm2</p>
49
<p>= 220 cm2</p>
51
<p>Well explained 👍</p>
50
<p>Well explained 👍</p>
52
<h3>Problem 2</h3>
51
<h3>Problem 2</h3>
53
<p>Find the total surface area of a cone with radius 5 cm and slant height 13 cm.</p>
52
<p>Find the total surface area of a cone with radius 5 cm and slant height 13 cm.</p>
54
<p>Okay, lets begin</p>
53
<p>Okay, lets begin</p>
55
<p>TSA = 282 cm2</p>
54
<p>TSA = 282 cm2</p>
56
<h3>Explanation</h3>
55
<h3>Explanation</h3>
57
<p>Use the formula: TSA = 𝜋r(r + l)</p>
56
<p>Use the formula: TSA = 𝜋r(r + l)</p>
58
<p>= 3.14 × 5 (5 + 13)</p>
57
<p>= 3.14 × 5 (5 + 13)</p>
59
<p>= 3.14 × 5 × 18</p>
58
<p>= 3.14 × 5 × 18</p>
60
<p>= 3.14 × 90</p>
59
<p>= 3.14 × 90</p>
61
<p>= 282.6 cm2</p>
60
<p>= 282.6 cm2</p>
62
<p>Well explained 👍</p>
61
<p>Well explained 👍</p>
63
<h3>Problem 3</h3>
62
<h3>Problem 3</h3>
64
<p>A cone has a radius of 6 cm and a height of 8 cm. Find the total surface area.</p>
63
<p>A cone has a radius of 6 cm and a height of 8 cm. Find the total surface area.</p>
65
<p>Okay, lets begin</p>
64
<p>Okay, lets begin</p>
66
<p>TSA = 301.44 cm2</p>
65
<p>TSA = 301.44 cm2</p>
67
<h3>Explanation</h3>
66
<h3>Explanation</h3>
68
<p>Find the slant height using:</p>
67
<p>Find the slant height using:</p>
69
<p>l = √r2+h2</p>
68
<p>l = √r2+h2</p>
70
<p>= √(62+82) </p>
69
<p>= √(62+82) </p>
71
<p>=√(36 + 64) </p>
70
<p>=√(36 + 64) </p>
72
<p>= √100</p>
71
<p>= √100</p>
73
<p>= 10 cm</p>
72
<p>= 10 cm</p>
74
<p>Use the TSA formula: TSA = 𝜋r(r + l)</p>
73
<p>Use the TSA formula: TSA = 𝜋r(r + l)</p>
75
<p>= 3.14 × 6 × (6 + 10)</p>
74
<p>= 3.14 × 6 × (6 + 10)</p>
76
<p>= 3.14 × 6 × 16</p>
75
<p>= 3.14 × 6 × 16</p>
77
<p>= 3.14 × 96</p>
76
<p>= 3.14 × 96</p>
78
<p>= 301.44 cm2</p>
77
<p>= 301.44 cm2</p>
79
<p>Well explained 👍</p>
78
<p>Well explained 👍</p>
80
<h3>Problem 4</h3>
79
<h3>Problem 4</h3>
81
<p>Find the curved surface area of a cone with radius 3.5 cm and slant height 5 cm.</p>
80
<p>Find the curved surface area of a cone with radius 3.5 cm and slant height 5 cm.</p>
82
<p>Okay, lets begin</p>
81
<p>Okay, lets begin</p>
83
<p>CSA = 55 cm2</p>
82
<p>CSA = 55 cm2</p>
84
<h3>Explanation</h3>
83
<h3>Explanation</h3>
85
<p>CSA = 𝜋rl</p>
84
<p>CSA = 𝜋rl</p>
86
<p>= (22/7) × 3.5 × 5</p>
85
<p>= (22/7) × 3.5 × 5</p>
87
<p>= 22 × 0.5 × 5</p>
86
<p>= 22 × 0.5 × 5</p>
88
<p>= 11 × 5 </p>
87
<p>= 11 × 5 </p>
89
<p>= 55 cm2</p>
88
<p>= 55 cm2</p>
90
<p>Well explained 👍</p>
89
<p>Well explained 👍</p>
91
<h3>Problem 5</h3>
90
<h3>Problem 5</h3>
92
<p>The slant height of a cone is 15 cm, and its curved surface area is 660 cm2. Find the radius.</p>
91
<p>The slant height of a cone is 15 cm, and its curved surface area is 660 cm2. Find the radius.</p>
93
<p>Okay, lets begin</p>
92
<p>Okay, lets begin</p>
94
<p>Radius = 14 cm</p>
93
<p>Radius = 14 cm</p>
95
<h3>Explanation</h3>
94
<h3>Explanation</h3>
96
<p>Use the CSA formula, </p>
95
<p>Use the CSA formula, </p>
97
<p>CSA = 𝜋rl</p>
96
<p>CSA = 𝜋rl</p>
98
<p>660 = (22/7) × r × 15</p>
97
<p>660 = (22/7) × r × 15</p>
99
<p>660 = (330/7) × r</p>
98
<p>660 = (330/7) × r</p>
100
<p>Multiply both sides by 7:</p>
99
<p>Multiply both sides by 7:</p>
101
<p>4620 = 330r</p>
100
<p>4620 = 330r</p>
102
<p>r = 4620 ÷ 330 = 14 cm</p>
101
<p>r = 4620 ÷ 330 = 14 cm</p>
103
<p>Well explained 👍</p>
102
<p>Well explained 👍</p>
104
<h2>FAQs on Surface Area of Cone</h2>
103
<h2>FAQs on Surface Area of Cone</h2>
105
<h3>1.What is the surface area of a cone?</h3>
104
<h3>1.What is the surface area of a cone?</h3>
106
<p>It is the total area that covers the outside of the cone, including its curved side and the base. </p>
105
<p>It is the total area that covers the outside of the cone, including its curved side and the base. </p>
107
<h3>2.What are the two types of surface area in a cone?</h3>
106
<h3>2.What are the two types of surface area in a cone?</h3>
108
<p>Curved surface area and total surface area are the two types of surface area in a cone.</p>
107
<p>Curved surface area and total surface area are the two types of surface area in a cone.</p>
109
<h3>3.What is the difference between slant height and height?</h3>
108
<h3>3.What is the difference between slant height and height?</h3>
110
<p>Slant height is the length from the tip to the edge of the base. Height is the straight line from the tip to the center of the base.</p>
109
<p>Slant height is the length from the tip to the edge of the base. Height is the straight line from the tip to the center of the base.</p>
111
<h3>4.Is curved surface area the same as lateral surface area?</h3>
110
<h3>4.Is curved surface area the same as lateral surface area?</h3>
112
<p>Yes, in cones, both curved and lateral surface area mean the same.</p>
111
<p>Yes, in cones, both curved and lateral surface area mean the same.</p>
113
<h3>5.What unit is surface area measured in?</h3>
112
<h3>5.What unit is surface area measured in?</h3>
114
<p>Surface area is always measured in square units like cm2, m2, or in2.</p>
113
<p>Surface area is always measured in square units like cm2, m2, or in2.</p>
115
114